Adhesive or Siser Heat Transfer Vinyl- HTV-Fishman Donuts

HTV Directions:

Start cutting your favorite Phish designs with Fishman Donut HTV! These are 12x12 inch sheets. Choose from 1 inch or 3/8 inch sized donuts.
 
Our Adhesive is premium outdoor vinyl and out HTV is fully masked and ready to use! You do not have to invest extra for masking so no fussing with adding another layer, it’s already masked and ready to cut and press.
 
Step 1: Cut your image with SHINY/PRINT side DOWN. Basically you cut on the white side. *Don’t forget to mirror your image!
 
Step 2: Weed the unwanted vinyl from the HTV sheets.Step 3: Preheat fabric 2-3 seconds, this will take out any moisture that may be in the fabric. (you should do this will ALL HTV) Press design in fabric at 310 degrees for 10-12 seconds with firm pressure. Step 4: Wait at least 24 hours before washing. Wash on cold, inside out and liquid detergent. With any HTV It’s always recommended to void washing with buttons or zippers especially for very dark patterns. Dry on very low heat or hang dry.

Adhesive Vinyl Directions:
These are 12x12 inch sheets. Choose from 1 inch or 3/8 inch sized donuts.

Step 1: Cut your image with PRINT side UP.
Basically you DO NOT cut on the white side.

Step 2: Weed the unwanted vinyl from the sheets.

Step 3: Apply with firm pressure.